ISOKIT
Connectors, Components, Case, Custom designed Printed Circuit Board (PCB) with CD of software and related books.

 ISOKIT

See special discount prices below.  This is a great kit project for Amateur Radio Clubs, Emergency Groups, and Emergency Operation Organizations, and those (ARES & RACES) HAMs who help save lives in times of emergency and disaster, The times when communications are needed most.  The BUXCOMM ISOKIT regular priced was; $39.95.  The cost of the parts alone at the parts shops are more than $60.00 dollars.   For quantity discounts Clubs, dealers and resellers, Call Ms Mata @ 1.866.300.1969:                       
NO TECH SUPPORT FOR KITS.  KITS should only be assembled by an experienced electronic technician. 

Say you don't have a sound card...!  Well if you have an available USB port, here's the answer to your sound card problem... CLICK HERE.  See our MISO.

In these uncertain times, we are making this kit available at an unheard of low price.  NO, we've not lost our mind, we simply would like to share the excitement of the sound card digital modes with you, without injury to your HAM radio budget.  If you want to experience PSK31, MT63, Packet, or simply enjoy the fun of EchoLink, then read on. . . Connectors, Components, Case, Custom designed Printed Circuit Board (PCB), solder, tye-wraps, velcro to affix in case, with CD of software with related books and articles.

ISO Unassembled Sound Card Interface Kit of parts with 5 pin DIN female jack (connector included),   When populated, the printed circuit board (PCB) has seven components on it.  The assembly of these 7 components can intimidate some new HAMs who have limited kit building skills.  There are no "SMD" in this kit. 
NO TECH SUPPORT FOR KITS.  KITS should only be assembled by an experienced electronic technician. 

Two (2) 600 ohm, 1:1 audio transformers to isolate transceiver Tx & Rx audio paths from the PC (prevent ground loops)
One (1) RED LED transmit indicator.
One (1) 750 ohm dropping resistor to limit current to the Opto-Isolator.
One (1) 0.82 uF audio coupling capacitor to couple transmit audio to transceiver input.
One (1) variable (pot/potentiometer) resistor as Tx audio level control.
One (1) 4N37 Opto-Isolator to prevent ground loop, hum or noise (potential difference) between radio and PC grounds.
One (1) 5 pin DIN, female connector, ISO to Transceiver cable jack.
One (1) Custom Designed, Printed Circuit Board (PCB) accomodates the seven (7) on-board components.
One (1) Black, Mallable, Poly-Plastic case to house the ISOKIT when completed.
One (1) Six (6) ft Serial Comport cable with molded DB9 wired and attached.
One (1) Length of .050, 60/40 Rosin Core solder for construction.
One (1) dual, shielded cables with Ferrite suppressors and 3.5mm stereo plugs attached.  (ISO to PC sound card I/O)
One (1) CD ROM of related software, drawings, illustrations, articles and Digital handbooks.
One (1) Hook-N-Loop velcro clasp to attached the ISO PCB to the inside of the Black Case.
              Printed Pictorial, assembly and setup instructions are in full color, and legible, even for my ole 75 + year ole eyes.

ISOKIT to PC Cables, Connectors, Components, Case, Printed Circuit Board, solder, are included.  A CD with PSK31 software, and lots of other software is included.  The assembly instructions, pictorial diagrams, schematics, are in color to help the builder to identify the parts, and their position on the PCB.  The instructions include setup procedures and settings.

Cable from ISOKIT to RADIO is NOT included.  PTT and automatic control is via the PC Serial Comport.  If you do not have an available serial comport, see our model USB2SC USB to serial comport adapter.   ISOKIT to Transceiver cables for all make and model radios may be purchased at: http://www.buxcomm.com/catalog/index.php?main_page=index&cPath=3

When you receive your BUXCOMM ISOKIT, you may Email us your Invoice/Order number, and we will send you a fully illustrated, and color,  "Sound Card Digital Interface and Setup Handbook" in PDF format, by return Email. 70 pages of the most informative writings on the subject of the HAM Radio digital modes.  This Digital Handbook is by Buck Rogers, K4ABT, and has many circuits,, and drawings with addendums that reference the correct setup and configuration of hardware and software for the digital modes.  YES, it's FREE to ISOKIT users.  WE ARE NOT RESPONSIBLE for errors, ommissions, or mistakes!   WE DO NOT PROVIDE TECH SUPPORT for Kits.  We designed the ISOKIT to employ the same radio to interface cable as the RASCAL GLX.  The ISOKIT does all AFSK digital modes; more than 50, including AFSK RTTY, however, it does not do FSK-RTTY, or hard-keyed CW.