Your Shopping Cart is empty

Radios with 6 pin mini DIN data jack..more INFO>


Units in Stock41
Add to Cart:

cat#   KVMDIN

KVMDIN for: KAM98, KAMxl, KPC3 - Plus, and KAM- KAM+ VHF (1200 baud) port and TinyTRAK to Radios with 6 pin mini DIN data jack.  This 6 pin Mini DIN is an ISO-9000 Standard, and is compatible with transceivers having 6 pin MINI DIN Data jacks.

IMPORTANT NOTE: Read the section of your Kantronic manual which references the "Carrier Detect" (CD command).  The KPC-3 and other Kantronic TNCees have a command (cmd:) which defaults to "INTernal" or the beginners mode.  When using the 6 pin Mini DIN I/O with your TNC and transceiver, the signal(s) are running "open-squelch."  The unsquelched receive signal (AF) will hold the KPC-3 and other Kantronic TNCees in receive mode (and will not send (transmit) until the open squelch signal is removed,  OR   change the KPCs, CD command from INTernal (INT to SoftWare (SW).

Kenwood's... etc

Yaesu, Kenwood, Icom, Azden, and Radios with 6 pin mini DIN accessory jacks, to
Kantronics: KAM, KAM+, KAM98, KAMxL, KPC3, KPC4, KPC9612, and kantronics with DB9 1200 baud radio ports.

AZDEN PCS 9000, 

Icom 706 MK2G, IC-207H, IC-2720H, IC-2725E, Icom's IC 706 Mk II... IC-7000, 703, etc... ID-880h,  Icoms with 13 pin DIN ... etc.

Kenwood TM-D700, TM-D710,  TM-255, TM-455, TM-733, TM-833, TM-G707, TM-V7A,  TM-G 707A, (Delta) D-700, TM-255, TM-455, TM-G707, TM-D700x, TM-V7, TS-480, TM-733, TM-833, TM-G707, TM-V7A, (Delta) D-700, 480hx,

YAESU  FT-817,  FT-100, FT-897, FT-1500, FT-3000, FT-8000, FT-8100, FT-8500, and Sorry, ALINCO does not comply with this ISO 9002 standard !

  • Model: KVMDIN
  • Shipping Weight: 0.2lbs
  • Manufactured by: BUXCOMM Corporation


Copyright © 2014 Powered by Zen Cart Design by

Your IP Address is: